| Mains supply | 230V 50/60Hz. |
| Mains rated current | 350mA maximum. |
| Internal power supply | 27Vdc nominal. |
| Total output current limited to | 3A @ 230Vac. |
| Quiescent current | 100mA @ 24V |
| Max battery size and type | 2 x 12V 7Ah VRLA connected in series. |
| Cabling | Spine & limb arrangement using QT603 network splitters. Spines wired in 1.5-2.5mm2 T&E; Limbs wired in 4 core stranded security cable (up to 6 limbs per QT603 splitter). Refer to main instructions for more details. |
| Open collector outputs | OP1 (active on standard call); OP2 (active on help req. call); OP3 (active on emergency call); OP4 (active on attack call). OP5 (failsafe fault output). Voltfree single pole c/o. Max. switch current 25mA; Max. switch voltage 30Vdc. |
| Other outputs | 24V Aux. Power (19.5V min, 28V max). Protected by a resettable fuse. Max. current 100mA. |
| PC connection | CONN1 provides an RS232 connection for use with our Quantec Surveyor data management software (via a PC) or a Quantec Printer. |
| Indicators | 2 line x 40 character backlit display; Power LED (lit when power is present, off when no power present). |
| Controls | Accept (A); Scroll Up; Scroll Down; Code Entry Buttons (1, 2, 3 and 4); Escape (E). |
| Connections | Plug-on type, largest acceptable conductor size 1mm2. |
| Expansion connections | CONN2 provides an RS232 connection for paging equipment. |
| Product dimensions (mm) | 410 W x 250 H x 80 D mm (base); 439 W x 274 H x 7 D mm (lid). |
| Construction & finish | Metal base, plastic lid. |
| IP Rating | IP30 |
| Weight | 3.5Kg. |
| Operating conditions/temperature | -5ºC to +40ºC. Max relative humidity: 95%. |
All prices are subject to change due to supply chain fluctuation. We endeavour to keep the website updated where possible.
Quantec Controller
£402.00 excl VAT
- Supplies power to and controls a Quantec Addressable Call System.
- Monitors all network devices and manages the routing and distribution of all calls.
- Provides connections for network wiring, standby batteries, a laptop (for system programming), optional paging/DECT equipment, an optional printer or PC (to run Quantec’s QT707S Surveyor data management software).
- Includes a library of 40 pre-set & 45 custom place names.
- System setup requires a laptop PC running Quantec’s QT707 programming tools.
- Can be semi-flush mounted using an QT385 bezel or fully-flushed using a BF359/3S stainless steel enclosure.
- System wiring requires one or more QT603 network splitters.
- Wiring should be made in a spine and limb arrangement using 1.5 to 2.5mm2 T&E (spines) and 4 to 8 core stranded security cable (limbs).
Only logged in customers who have purchased this product may leave a review.
Reviews
There are no reviews yet.